Realize Your Process With Unlimited Possibilities

Head Peripherals|Table Peripherals|Material Handling|Dispensing|Nozzles & Grippers |Custom

Head Peripherals are mounted on the X/Y system of any robot platform and can perform an action at machine coordinates.

Head Peripherals

Options Include:

  • Expansive Cameras and Lens Combinations
  • Observer Cameras
  • Contact, Light, and Laser Height Sensors
  • Universal & High Precision Z axes
  • Harmonic Rotary Drives
  • Heated, Ultrasonic, & Sinter Bond Heads
  • Various Dispenser Types
  • Ionizers and UV Lights
  • Milling heads
  • Other and Custom
  • Table Peripherals are optimized based on your process to to maximize process and space efficiency. Stations and cameras can be added for assembly of components.

    Head Peripherals

    Options Include:

  • Expansive Cameras and Lens Combinations
  • Eutectic Oven and HotGas Heaters
  • UV Cure Ovens and Bottom Heaters
  • Single and Multi Flipper
  • Interposer and Tilt Stations
  • Material Feeders and Transport Systems
  • Force Detection Load Cells
  • Other and Custom
  • Material Handling options are expansive and can be adapted to nonstandard dimensions of trays and work-piece carriers. Automated feeders allow the machine to continuously run during a shift.

    Material Handling

    Options Include:

  • Automated Wafer/Magazine Handling
  • Wafers on Expansion Rings and Disco Frames
  • Tape Feeders
  • Re-Taping Modules
  • Foil and Preform Feeders
  • Stack Tray Feeders
  • Vibratory and Bowl Bulk Feeders
  • Shuttle/Carrier Transport Systems
  • Vacuum Gel Paks and Waffles
  • Other and Custom
  • Dispensers of several types and configurations can be mounted into our systems. Automated cleaning/calibration stations ensure that the process is validated and maintained during production.

    Dispensing

    Options Include:

  • Time/Pressure Dispenser
  • Auger Screw Dispenser
  • Jet Dispenser
  • Piston Dispenser
  • Two-Component Dispensers
  • Dispenser Heaters
  • Automated Dispenser Cleaning Stations
  • Weight Station
  • Stamping/Pin Transfer
  • Nozzles & Grippers are selected or designed based on component delicacy, electrostatic sensitivity, size, temperature, etc...Force sensors can be integrated into the application plate of specific work areas for precise control of pick/place forces.

    Head Peripherals

    Options Include:

  • Universal Juki Nozzles
  • Vacuum-Actuated Grippers
  • Automatic Calibrations
  • Automatic Nozzle Changer
  • Other and Custom
  • Custom and third party hardware, dispensers, etc... can be integrated into our systems if your process requires this and is not already part of the standard component matrix. Additionally, our equipment can connect in-line to your machines via a SMEMA interface or communicated to via SECS-GEM, Digital I/O, TCP/IP protocols.

    Custom